HYPW High Speed Cross Lapper:
This nonwoven machine is a higher speed unit,aims to to fold and plate the fiber webs from carding machine evenly into the required weight and thickness and then to feed the fiber batt to the next procedure,such as needle punching procedure or thermal bonding procedure,etc.
 

Characteristics:
a. Machine frame is 8mm thickness armor plate assembled with brace.
b. Anti-static PVC lattices are for transferring, cross lapping and compensating. Bottom belt is aluminum-alloy lattice.
c. Each lattice driving roller is seamless steel, and specially strengthened at the ends of axletree.
d. Cross lapping and reciprocating is subsection controlled accurately.
e. Reciprocating adopt synchronous belt for drive.

Features:
1. To fold and pave the mesh after carding evenly into certain width and thickness, then transfer it to next procedure after pressurization.
2. The output layer has high uniformity, smooth surface, and the product has two edges neatly and trimmingly, and the product quality is stable.
3. The use of high-performance frequency conversion or servo drive, stable operation, fast response.
4. The use of anti-static high-strength carbon curtain, to avoid stress deformation of the cotton layer operation.
5. Adopt unique corrective control principle.
6. Using a data control system, the output uniformity can be fully compensated with actual process requirements.
7. Input and output is controlled synchronously, to avoid breakage of the cotton layer stretch.
8. Adopt man-machine interface for parameter setting and input of process data.
9. Abnormal fault alarm automatically.
10. Output bottom curtain width is detected automatically.